|
|
نخستین کنفرانس ملی چالشهای محیط زیست: صنعت و معدن سبز
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Introducing a heat integration method to reduce energy consumption and pollutant emission in the extractive distillation process |
|
| چکیده انگلیسی مقاله |
This paper evaluates separation of a minimum boiling homogeneous azeotropic mixture using the extractive distillation process. To alter the vapor-liquid equilibrium of the water-ethanol azeotropic mixture, a glycerol entrainer with a boiling point higher than those of water and ethanol was used. Feed-splitting was used for heat integration. In this method, the feed is split into two sections, where the bottom section is pre-heated through a hot stream, while the top section flows into the column without a temperature change. This reduces the heat duty of the reboiler, with the heat duty of the condenser remaining almost unchanged. To evaluate the proposed method, four different processes were accurately simulated in Aspen HYSYS V.10. The proposed process was found to have 19% lower energy consumption than extractive distillation without heat integration. Also, the optimized process resulted in a 18.64% reduction in carbon dioxide emission compared to the original process. This significant improvement demonstrates the effectiveness of heat integration in minimizing environmental impacts. |
|
| کلیدواژه‌های انگلیسی مقاله |
Extractive distillation، CO2 emission، Heat integration، Minimum boiling azeotrope، Feed-splitting |
|
| نویسندگان مقاله |
| ali hedayat
| kimia asghari
| maedeh alimohammadi
| saber zeinali
|
|
| نشانی اینترنتی |
http://ncec.modares.ac.ir/browse.php?a_code=A-10-595-1&slc_lang=fa&sid=1 |
| فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
دوره مرتبط |
کنفرانس مرتبط |
فهرست کنفرانس ها
|
